Is there a way to shutdown or OOS an OTR, OCLD, or OCI transponder to reduce power draw on a 32-Slot 6500 Shelf?
Hello Curtis, welcome to the community and our 6500 forum. I'm going to reach out to a few of our SMEs and ACEs to see if can get an answer to your question.
A card can be put to OOS state, if it is not carrying any traffic.
For configuring a card as OOS, all the associated facilities must be configured as OOS first.
However, this will not stop the card from drawing the power.
If it is the requirement that the card should not draw any power, better we do not configure the card in the slot. After configuring the card as OOS, remove the card from the equipment and facility provisioning.
Retrieving data ...